Anti-Slip Flooring

Topcoat Anti Slip system is a hard wearing anti-slip Epoxy resin floorscreed suitable for use in wet areas. It is seamless, easy to clean and comes in a large range of colours.


Download Data Sheet



The system consists of four steps:

  1. Concrete sub floor is prepared by dust free shot blasting or diamond
  2. Epoxy high penetration Primer 2000 is applied.
  3. While primer is still wet the surface is blinded with Quartz aggregate size
    0.1 – 0.3 mm for light anti-slip
    0.3 – 0.6 mm for medium anti-slip
    0.4 – 0.8 mm is used for heavy duty applications such as carpark ramps.
  4. Epoxy screed Topcoat 2000 is applied using a squeegee followed by
    back rolling.



Carparks, Fire stations, Workshops, Processing areas, Corridors, Laboratory areas, Warehouses etc.

Screed Colours:

Battleship Grey (dark Grey), Gunmetal Grey (light Grey). Leaf Green, Marine Blue, Sky Blue, Honey Yellow, Sand Yellow, Tomato Red, Tile Red.

Conforms to EN 13813:2002
Conforms to British Slip Resistance Standard No. BS7976-2:2002 under both wet and dry conditions.


Topcoat Antislip Substrate Requirements:

Concrete or substrate should be a minimum of 25N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS 8204 and free from rising damp and ground water pressure. If no damp proof membrane is present D-Proof DPM can be used.

Technical Information:

Product Components


CE Labelling EN 13813 :2002

Essential Characteristics PerformanceTechnical Specification
Flexural Strength >20N/mm2EN 13813:2002
Wear Resistance AR2EN 13813:2002
Bond Strength >1.5N/mm2
EN 13813:2002
Compressive Strength>45N/mm2
EN 13813:2002
Impact Resistance IR4EN 13813:2002
Skid Resistance Testing -
76BS 7976 Part 2:2002
Skid Resistance Testing -
68BS 7976 Part 2:2002


Classification of Skid Resistance Values:

Pendelum Value                 Slip Risk
0 – 24                                      High
25-35                                       Moderate
36-64                                       Low
>65                                          Extremely Low

Health and Safety:
Skin and eye contact should be avoided by use of suitable protective clothing such as gloves, goggles, apron etc.
Use in well ventilated area. In the event of eye contact flush with water for 15 minutes and seek medical attention.