Epoxy Resin Flooring
Topcoat 2000 is a high performance 100% solids 2 component, Epoxy floor coating. Topcoat 2000 provides a hard wearing floor finish for use in industrial and commercial premises where a high quality floor is required.
Concrete and plastered surfaces in Factories, Warehouses, Chemical plants, Workshops, Carparks, Clean rooms, Food processing areas, Service areas, etc.
The surface should be free of grease, fat, laitance, loose materials, dust and release agents. These contaminants may be removed by washing with an industrial detergent followed by dust free shot blasting or diamond grinding.
Dell Raheen Limerick, Multis Galway, Tyco, Stryker Orthopaedics, Zimmer, Tesco, Toyota Galway, Toyota Limerick
Aesthetically pleasing – enhances the working environment
Easy to clean and maintain
Conforms to EN 13813:2002
Concrete or substrate should be a minimum of 25N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS 8204 and free from rising damp and ground water pressure. If no damp proof membrane is present D-Proof DPM can be used.
Solids content 100%
Product is solvent free
Mix ratio 4:1 by weight
Pot Life 25 mins @ 200C
Cure Time 8 hrs @ 200C
Gunmetal Grey RAL 7040
Tile Red RAL 3009
Battleship Grey RAL 7031
Non Standard Colours
Leaf Green RAL 6002
Sky Blue RAL 5015
Sand Yellow RAL 1002
Tomato Red RAL 3013
Topcoat 2000 can be used as a roller coat and is included as part of the following systems – Topcoat Flake. Topcoat Antislip, Topcoat Quartz
CE Labelling EN 13813 :2002
|Essential Characteristics||Performance||Technical Specification|
|Flexural Strength||>20N/mm2||EN 13813:2002|
|Wear Resistance||AR2||EN 13813:2002|
|Bond Strength||>1.5N/mm2||EN 13813:2002|
|Compressive Strength||>45 N/mm2||EN 13813:2002|
|Impact Resistance||IR4||EN 13813:2002
|Shore D Hardness||76||DIN 53505|
Health and Safety:
Skin and eye contact should be avoided by use of suitable protective clothing such as gloves, goggles, apron etc.
Use in well ventilated area. In the event of eye contact flush with water for 15 minutes and seek medical attention.